- Home
- Bus '68 - '79
- Exhaust
- Bracket Heat Exchanger Support Bus '75-'78
Bracket Heat Exchanger Support Bus '75-'78
- Details
- Send to friend
- Related products
- Customers also bought
Exclusive germansupply.com reproduction part.
This bracket holds the weight of the heat exchanger and exhaust system on the left side of the engine. It attaches to the lower part of the fan shroud and the heat exchanger outlet flange. This critical part is often missing, and without it you have a good chance of developing exhaust leaks at the head, or worse, having the exhaust studs pull out of the cylinder head. For stock exhaust on Bus '75-'78. See also our reproduction alternator bracket, link below.
This bracket holds the weight of the heat exchanger and exhaust system on the left side of the engine. It attaches to the lower part of the fan shroud and the heat exchanger outlet flange. This critical part is often missing, and without it you have a good chance of developing exhaust leaks at the head, or worse, having the exhaust studs pull out of the cylinder head. For stock exhaust on Bus '75-'78. See also our reproduction alternator bracket, link below.
-
Copper Exhaust Sealing Ring Bus '75-'78$CAD3.50
-
Copper Exhaust Nuts m8 12mm across flats, kit of 8$CAD8.30
-
Exhaust Pipe Elbow Pair - Between Heat Exchanger and Manifold Bus '75-'78 Rebuilt$CAD380.00
-
Exhaust System Mounting Kit Bus '75-'79, Vanagon '80-'82$CAD31.00
-
Bracket Heat Exchanger Support Front Right Bus '75-'78$CAD28.00