- Home
- Bus '68 - '79
- Exhaust
- Bracket Heat Exchanger Support Front Right Bus '75-'78
Bracket Heat Exchanger Support Front Right Bus '75-'78
- Details
- Send to friend
- Related products
- Customers also bought
Exclusive germansupply.com reproduction part.
This bracket holds the weight of the heat exchanger and exhaust system on the right side of the engine. It attaches to the front engine cover and heat exchanger flange. This critical part is often missing, and without it you have a good chance of developing exhaust leaks at the head, or worse, having the exhaust studs pull out of the cylinder head. For stock exhaust on Bus '75-'78. .
This bracket holds the weight of the heat exchanger and exhaust system on the right side of the engine. It attaches to the front engine cover and heat exchanger flange. This critical part is often missing, and without it you have a good chance of developing exhaust leaks at the head, or worse, having the exhaust studs pull out of the cylinder head. For stock exhaust on Bus '75-'78. .
-
Cylinder Head Temperature Gauge$CAD360.00
-
Pertronix Electronic Ignition Vacuum Advance Bosch OE Distributors$CAD227.00
-
Fuel Hose 7mm High Pressure Reinforced Rubber - per Metre$CAD26.00
-
Heater Flex Hose Right Bus '72-'79$CAD16.00
-
CV Boot Bug, Ghia, Type 3 w/IRS$CAD7.50
-
Valve Cover Gasket Bus '72-'79 Vanagon '80-'83$CAD2.75
-
Pushrod Tube Seal Set (16) Bus '72-'79 / Vanagon '80-'83 Porsche 914-4$CAD29.00
-
Bracket Heat Exchanger Support Bus '75-'78$CAD26.00
-
Alternator & Exhaust Bracket Kit Bus '75-'78$CAD147.00